Oxygen Deficiency Monitor w/ 10+ Year Sensor
The Air Check oxygen deficiency monitor is perfect for facilities using nitrogen, helium, and argon. The monitor is also suited for use in confined spaces, cryogenic facilities, and freezers. The monitor remains accurate at temperatures as low as -40C. Our long lasting zirconium oxide sensor lasts for 10+ years. Read more about product here.
- 10 + Years No Calibration Sensor
- Two-Alarm Relays for 19.5% and 18.0%
- No Maintenance Required
- Ultra Loud Built-in audible alarm 90 db
- 3 Year Warranty
- Digital Display, 4-20mA Analog Output
- Operates in Freezers at – 40 ºC
- No Drift due to Thunderstorms or barometric pressure changes
- Wall mounting brackets and optional plug-in wall power supply
- UL, C UL and CE Approvals
Long Lasting Zirconium Sensor
The Oxygen Deficiency Monitor features a zirconium sensor capable of providing accurate readings for 10+ years with little maintenance. This reliable, maintenance free sensor will pay for itself in just two years and save your business as much as $475 per year. Every unit comes with a full 3-year warranty for your peace of mind.
The Air Check O2 Deficiency Monitor is suitable for a range of uses. From bar and restaurant beverage stations to tire repair centers, food processing plants, and hospitals, oxygen monitors ensure that nitrogen and CO2gas are safely used and no leaks occur. The zirconium O2 sensor performs reliably in temperatures ranging from 55 Celsius to -40 Celsius, so it’s ideal for a range of environments, including freezers. The monitor also performs well in basements and other confined spaces.
Once set up, the O2 zirconium sensor will operate continuously, without calibration or adjustment. The system monitors for any faults and displays errors on the gas concentration screen, so you can respond.
The low maintenance, long lasting sensor provides continuous monitoring in environments where inert nitrogen gas and CO2 gas are stored. As long as everything is operating properly, the monitor stays silent. If oxygen levels reach the OSHA action level, defined at 19.5 percent, a built-in horn alerts employees of danger.
No Calibration Required
While other oxygen deficiency monitors might require semi-annual tune-ups to work properly, the Air Check O2 Deficiency Monitor provides constant monitoring with no adjustments. This saves you time and money while protecting your organization and delivering peace of mind.
Plug & Play Setup
The Air Check O2 Deficiency Monitor mounts in minutes and is ready to go right out of the box. Simply mount the unit on the wall where you need to monitor oxygen levels, plug it into the power supply, and power on the unit. After four minutes, the monitor begins sampling oxygen levels. Levels display on the screen so you can check whenever you walk by. Enjoy a reliable oxygen sensor that’s easy to use, easy to read, and operates with no attention 24/7 for up to 10 years.
Air Check O2 Deficiency Monitor Features
To suit user’s needs, the Air Check O2 Deficiency Monitor comes in a range of configurations. Every unit comes with a full-featured, dual level monitor, options for alarm relays and hysteresis to account for supply valves for CO2 and nitrogen. All units have a built-in CPU that houses the monitor, display, and alarm.
Sample Draw Oxygen Monitor w/ 10+ Year Sensor
Our Air Check O2 sample draw monitor is a specialized version of our oxygen deficiency monitor perfect for situations where the monitor cannot physically be in the concerning area. The monitor can reside up to 100ft away from the area to be tested and uses a polyurethane or equivalent 1/4 inch tube to draw the sample. For a sterile environment, this monitor is the solution. This has a 10+ year zirconium oxide sensor.
- 10 + Years No Calibration Sensor
- Two-Alarm Relays for 19.5% and 18.0%
- No Maintenance Required
- 3 Year Warranty
- Digital Display, 4-20mA Analog Output
- No drift due to thunderstorms or barometric pressure changes
- Wall mounting brackets and optional plug-in wall power supply
- Built-in Flow Sample Pump
- UL, C UL and CE Approvals
Long Last Zirconium Sensor
As a leading manufacturer of oxygen monitors, PureAire Monitoring Systems puts performance, reliability, and affordability first. Our oxygen monitors last for 10+ years with no replacement, no maintenance, and no hidden costs.
These monitors work well anywhere gas leaks would cause oxygen depletion, including in laboratories, cryogenics chambers, hyperbaric chambers, and freezers. Our monitors have a long-lasting zirconium oxide sensor, which delivers reliable monitoring against leaks of argon, helium, and nitrogen for 10 years. The device has its own audible and visual alarm, but it can be connected to fire alarm systems to amplify the reach.
The O2 monitor is easy to set up, easy to operate, and requires no calibration once installed. Supervised watchdog software checks that everything is working properly and notifies you of any inconsistencies on the monitor. Immune to performance changes from barometric pressure drops, humidity, and temperature, these monitors are reliable and cost-effective.
Connects to Distributive Control Systems and Programmable Logic Controllers
The Air Check O2 Sample Draw Monitor can be used with PureAire’s proprietary controllers, either single or multichannel. Dual selectable alarm relays set off strobe lights and remote horns, so that staff can learn of the hazard. Individuals can operate the oxygen monitors remotely by as much as 1,000 meters or 0.6 miles from the centralized control systems.
Better Oxygen Sensor
Unlike other oxygen monitors, PureAire’s Air Check O2 Deficiency Monitor relies upon a Current Limiting Zirconium Oxide Oxygen sensor. This sensor does not need a reference gas and can perform reliably in environments that contain 100 percent nitrogen. The sensitive monitor can tell oxygen levels by percentages, so it can operate in lower-temperature environments than the more frequently used concentration-type cells. The improved cell helps PureAire sensor’s last for 10+ years.
Once set up, the Air Check O2 Deficiency Monitor performs reliably with no concentration. The earth provides natural calibrated oxygen, which keeps the O2 monitor challenged to 10.9 percent. Enjoy consistent oxygen monitoring with no adjustments. For peace of mind, test the unit’s response by subjecting the system to nitrogen periodically.
O2 Monitor System Features
PureAire offers its Air Check O2 Deficiency Monitor in multiple configurations. Every unit comes with a choice of low-cost basic display monitor or full featured, dual level monitor with user selectable alarm relays. When built-in alarm relays are used, the sensor continuously monitors electronics, sensors cell, and sample flows. Any faulty information is provided to the front panel LED, mA output, and alarm relay, for instant notification.
Dual O2/CO2 Monitor
This dual sensor monitor is designed for use in areas containing Helium, Argon, and/or Nitrogen, that contain CO2 as well. It includes all of the top of the line features of our air check oxygen deficiency monitor, though it monitors the level of CO2 in the room as well. It is ideal for use in environments such as breweries, beverage or other bottling plants, pharmaceutical manufacturing facilities, or grow rooms. This monitor contains a 10+ year zirconium oxide sensor.
- No maintenance zirconium O2 cell and long life CO2 sensor
- No calibration required for oxygen
- Self-calibrating CO2 sensor
- Local backlit concentration display
- Built-in audible horn
- Built-in visual LED alarm indicators
- Alarm level 1 and 2 for O2 and CO2
- No drift due to environmental or temperature changes
- 3 year warranty
PureAire Monitoring System’s Dual O2/CO2 Monitor provides continuous monitoring of oxygen and carbon dioxide. This monitor is ideal for use in confined spaces where low oxygen concentrations could pose a health hazard, from nitrogen gas storage sites to carbon dioxide beverage gas distribution areas.
While many O2/CO2 monitors rely on electrochemical sensor cells, PureAire developed its Dual O2/CO2 Monitor with a zirconium oxide and NDIR cell. This cell is impermeable to changing barometric pressure, storms, temperatures, and humidity, for reliable performance across a range of atmospheric conditions. While other units require quarterly calibration and periodic maintenance, PureAire’s Dual O2/CO2 Monitor needs no maintenance or calibration once installed. If you seek an O2/CO2 monitor that you can plug in, leave alone, and rely on to monitor oxygen and carbon dioxide levels, try PureAire.
No Calibration Required
Unlike other oxygen monitors, PureAire’s Dual O2/CO2 Monitor does not require quarterly calibration. The earth provides calibrated oxygen to challenge the Dual O2/CO2 Monitor to 20.9 percent oxygen and 400 ppm CO2 under ambient conditions. On a weekly basis, the monitor automatically recalibrates to the ambient CO2 level for reliable performance. The monitor needs no adjustments and no maintenance once installed, for truly maintenance-free O2/CO2 detection.
Plug & Play Setup
PureAire’s Dual O2/CO2 Monitor is ready to work the moment you take it out of the box and mount it. All you need to do is remove the unit, mount it to a wall or another surface, and connect the power supply to a socket. The monitor takes four minutes to start up, then begins operating automatically. Once set up, the Dual O2/CO2 Monitor provides non-stop, unattended leak detection for years. Our bumper-to-bumper warranty makes the Duel O2/CO2 Monitor the last monitor you’ll ever need to purchase.
PureAire’s Dual O2/CO2 Monitor Installations
PureAire’s Dual O2/CO2 Monitor is ideal for a range of installations. Place one in restaurants, fast food outlets, bars, and anywhere that N2 and CO2 are used to dispense carbonated beverages. Or use it in an agricultural grow room, laboratory, or other place where inert gases could pose a health hazard if a leak occurs. PureAire’s Dual O2/CO2 Monitor never drifts or loses sensitivity when weather, barometric pressure, or temperature changes, so you can rely on it to work properly at all times.
Dual O2/CO2 Monitor Control Features
PureAire’s Dual O2/CO2 Monitor comes with user-selectable relays that connect to on-off valves, which control CO2 injection and simultaneously activate alarms when oxygen levels fall below the OSHA threshold. The oxygen sensor can also check carbon dioxide levels and control nitrogen generators in hypobaric rooms. PureAire’s Dual O2/CO2 Monitor features an inexpensive monitor that has a local display, separate controls for oxygen and carbon dioxide, safety alarms, and a built-in CPU.